NP23LP/456-6640W For NEC Projector Lamp NP-P401 NP-P401WJL-N2
NP-P451W
Product Parameter
| Part Numbers | NP23LP/456-6640W |
| Fittable projector models | For NEC Projector Lamp NP-P401 NP-P401WJL-N2 NP-P451W NP-P451WJL
NP-P451WJL-N2 NP-P451X NP-P451XJL NP-P451XJL-N2 NP-P501X NP-P501XJL
NP-P501XJL-N2 NP-PE501X NP-PE501XJL NP-PE501XJL-N2 P401W P501X |
| Bulb Type | 270 W |
| Life time | 3000 -5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Product Information
The NEC NP23LP/456-6640W replacement lamps are compatiable with
NP-P401 NP-P401WJL-N2 NP-P451W projectors.The working hour time
is:3000-5000 hours,After repalcing our new lamps,the projector
performance can be the same of the new original one and improve the
effect of projection,and make you feel comfortable while using.
Disconnect the video source
After powering off the projector, disconnect the video source
device from the projector by removing the cable from both ends.
Bulb warranty
Ensure Safety: Before starting the installation process, make sure
the projector is turned off and has cooled down sufficiently.
Unplug the projector from the power source to avoid any electrical
accidents during the installation.
Refer to the User Manual: Consult the user manual provided by the
projector manufacturer for specific instructions on lamp
replacement. The manual will provide detailed information on the
lamp type, installation procedure, and any additional precautions
specific to your projector model.
Allow Lamp to Cool: Projector lamps generate heat during operation.
It is crucial to allow the lamp to cool down completely before
attempting to replace it. This prevents the risk of burns or damage
to the new lamp.
Use Proper Tools: Prepare the necessary tools for the installation,
such as a screwdriver or lamp removal tool, as specified in the
user manual. Using the correct tools will ensure a secure and safe
installation.
