GT50LP For NEC Projector Lamp GT1150 GT2150
Product Parameter
| Part Numbers | GT50LP |
| Fittable projector models | For NEC Projector Lamp GT1150 GT2150 |
| Bulb Type | 250 W |
| Life time | 3000 -5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Flexibility in Projection Distance
Projectors provide flexibility in projection distance, allowing
users to adjust the size of the projected image based on the
available space. This makes projectors suitable for both small and
large rooms or venues
Product Information
The NEC GT50LP replacement lamps are compatiable with GT1150 GT2150
projectors.The working hour time is:3000-5000 hours,After repalcing
our new lamps,the projector performance can be the same of the new
original one and improve the effect of projection,and make you feel
comfortable while using.
Precautions
Refer to the User Manual: Consult the user manual provided by the
projector manufacturer for specific instructions on lamp
replacement. The manual will provide detailed information on the
lamp type, installation procedure, and any additional precautions
specific to your projector model.
Use Proper Tools: Prepare the necessary tools for the installation,
such as a screwdriver or lamp removal tool, as specified in the
user manual. Using the correct tools will ensure a secure and safe
installation.
Access the Lamp Compartment: Locate the lamp compartment on your
projector. The exact location may vary depending on the projector
model. Usually, it is accessible from the top or bottom of the
projector or through a side panel. Remove any screws or latches
that secure the compartment.
Remove the Old Lamp: Carefully detach the old lamp by following the
instructions provided in the user manual. In some cases, the lamp
may be held in place by screws or clips. Gently release the lamp
and disconnect any cables or connectors attached to it.
